An atom is the smallest imaginable portion of matter, and all matter is said to consist of atoms. A molecule1 is the smallest conceivable combination of atoms, and every compound substance is ultimately built up of molecules2. An element is a substance that has hitherto defied the efforts of the chemist to subdivide3 or split up. Over seventy of these elementary substances are at present known, and their number is being constantly added to. Again, by improvement in analytical4 methods, a so-called element may be subdivided5, and thus removed from the list. The elements are classified into metals and non-metals; and it is convenient to give each of them a symbol to save trouble in writing, and to render clearer to the reader the chemical nature of a compound body. Thus, the symbol for the element aluminium6 is Al; for silicon7 Si; for carbon C; for calcium8 Ca; for oxygen O; for iron Fe; for hydrogen H; for chlorine Cl; and so on.
We are taught by chemistry that elements are capable of combining only in definite proportions, and that each substance possesses a definite proportion peculiar9 to itself. That proportion is called the atomic weight of the element; or, it is the relative weight of the atom of each76 substance compared with that of the lightest substance known, hydrogen.
Thus, the atomic weight of hydrogen being taken as 1, it is found that an atom of chlorine is 35.5 times as heavy as that, so that the atomic weight of chlorine is said to be 35.5. Now, in spite of the enormous difference between the weight of the two elements just mentioned, they combine in the same proportions by volume; and the union is known as hydrochloric acid, or HCl.
But in certain cases elements do not combine in equal proportions; for instance, an atom of oxygen will not combine with less than two of hydrogen. Further, with this we find that the three volumes are condensed into the space of two volumes—a very common phenomenon in the chemical combination of gases. The union of hydrogen and oxygen alluded10 to forms water, the chemical symbol of which is, consequently, H2O.
Chemical affinity11, or chemical attraction, is the force which is exerted between molecules not of the same kind. Thus, in water, which, as we have seen, is composed of hydrogen and oxygen, it is affinity which unites these elements, but it is cohesion12 which binds13 together two molecules of water. In compound bodies, cohesion and affinity operate simultaneously14; whilst in simple bodies, or elements, cohesion alone has to be considered. To affinity are due all the phenomena15 of combustion16 and of chemical combination and decomposition17.
Certain gases, such as chlorine and nitrogen, and such substances as sulphur, carbon, and silicon, with many others, form acids in conjunction with hydrogen, or hydrogen and oxygen. These combine with greater or less facility with other elements which do not form acids, and are termed bases. A combination of an acid and a base is known as a salt. Salts the names of which end in77 -ide, such as chloride, sulphide, etc., are combinations of a metal with a non-metal. Monoxide means an oxide18 containing one atom of oxygen; dioxide one containing two atoms; protoxide means the first oxide, because it is the first or lowest of the oxides of the given metal in amount of oxygen present; the highest oxide is often known as peroxide. The terminations -ous and -ic are frequently used for the lower and higher oxides respectively. Examples:—
FeO, iron protoxide, or ferrous oxide.
Fe_{2}O_{3}, iron sesquioxide, or ferric oxide.
FeS_{2}, iron disulphide.
Sb2S3, antimony trisulphide.
The following symbols may be indicated as referring to compounds especially met with in brick-earths:—
CaO, lime, instead of calcium oxide.
Al_{2}O_{3}, alumina, instead of aluminium trioxide.
SiO_{2}, silica, instead of silicon dioxide.
K_{2}O, potash, instead of potassium oxide.
In analysing a body, the first step consists in determining the nature of the elementary substances contained therein. That may be accomplished22 in the dry way by means of the blowpipe and accessories, as explained in the last chapter. Such an examination, as previously23 remarked, is known as a qualitative24 analysis. Or, it may be accomplished in the wet way by ordinary chemical examination. The next step is to determine the amount of the constituents26 present, and that is known as a quantitative27 analysis. In making a qualitative analysis, the chemist is assisted by the knowledge that certain basic substances and certain acids produce peculiar78 phenomena in the presence of known substances or preparations termed reagents.
There is a great difference between a chemical compound and a simple mixture of elements; and it is not always easy (e.g., some alloys) to say whether a substance is in the one state or the other. This distinction is well exemplified by the air we breathe. The chemist finds by analysis that the air is nearly constant in composition, containing essentially28 in 100 parts 76.8 by weight of nitrogen (including about 1 per cent. of the recently-discovered element, argon), and 23.2 of oxygen. Small proportions of water vapour, carbon dioxide, etc., may be ignored for our present purposes. In view of this comparatively uniform composition, the question at first arises as to whether the air is, or is not, a chemical compound? The answer is in the negative, for, amongst other things, it can be shown that the ratio of 76.8 to 23.2 is not that of the atomic weights of the two elements present, viz., 14 : 16, nor of any simple multiples of these.
We will now quote a few analyses of well-known earths, and explain each in turn:
Chemical Composition of China-clays.8
Kaolin. Kaolin average. Sandy Kaolin.
Silica 46.32 44.60 66.68
Alumina 39.74 44.30 26.08
Iron oxide .27 .20 1.26
Lime .36} 1.60 .84
Magnesia .44} trace
Water 12.67 8.74 5.14
79 The kaolin alluded to in the first column is a remarkably29 pure material, perfectly30 white, and contains an enormous quantity of water. It refers to one of the finest washed china-clays in the market, and is extensively used in porcelain32 manufacture. It is quoted here principally to give an idea of what a really pure clay is like chemically. We notice that, in spite of its relative purity, it contains .27 per cent. of iron oxide. This could have been well done without, from the manufacturer’s standpoint, but is of course a very minute proportion. Small as it is, it must exert a slight amount of colouring influence. The lime and magnesia are present in slightly larger proportions, and a little more of either would be advantageous33 rather than otherwise, as assisting to flux34 the material. This is an earth with which practically anything may be done by judicious35 blending and careful preparation.
With reference to the second column, the figures do not refer to any particular clay, but they have been compiled to show the average composition of kaolins as used in the market. It will be observed that the silica and alumina are present in approximately equal proportions, which is a characteristic of fairly good china-clays. The iron oxide remains36 as before, but there is a larger proportion of lime and magnesia—as much as can be permitted except in a second-rate clay.
The evidence of the third column shows that the sand in the china-clay is to a large extent quartzose, and this is at the expense of the alumina. Such a material would be suitable for making a species of white fire-brick, and it might do for the commoner kinds of china-ware37. The earth is really of the nature of a loam38—a sandy clay. There is too much iron in it for the production80 of perfectly white goods. The proportion of lime might be increased to advantage.
Chemical Composition of Fire-clays from Newcastle-on-Tyne.9
1 2 3 4 5 6 7
Silica 51.10 47.55 48.55 51.11 71.28 83.29 69.25
Alumina 31.35 29.50 30.25 30.40 17.75 8.10 17.90
Iron oxide 4.63 9.13 4.06 4.91 }2.43 1.88 2.97
Lime 1.46 1.34 1.66 1.76 }1.30
Magnesia 1.54 .71 1.91 trace 2.30 2.99
Water, etc. 10.47 12.01 10.67 12.29 6.94 3.64 7.58
The reader will see at a glance that the range of variation permissible39 in fire-clays is very wide. These earths are all found close together, and are utilised for similar purposes, though often blended to produce desired results. It will be noticed that one of them (No. 6) contains as much as 83.29 of silica, whilst another has no more than 47.55 per cent. The range with reference to alumina is very wide also, from 8.10 percent. (No. 6) to 31.35. The refractory40 character of any sample of fire-clay is determined41 by the proportions in which the silica and alumina are contained, and by the absence of lime, iron, and other easily fluxible substances. The proportion of iron discovered in sample No. 2 is certainly much in excess of the requirements of the material, as a fire-clay, and this no doubt is tempered by admixture, unless utilised for inferior goods. The iron oxide in the other samples is about sufficient for general purposes. The amount of lime present in all the samples constitutes a good feature; much lime cannot on any account be allowed in earths for fire-clay goods. With so much iron present, and81 the fair proportions of magnesia (except in sample No. 4) these clays may be regarded as typical, with the exception of No. 6. They have been utilised for many years in the manufacture of fire-bricks and the like.
Chemical Composition of Fire-clays, from Welsh localities.
1 2 3
Silica 50.35 56.90 54.80
Alumina 23.50 24.90 27.60
Iron oxide 10.40 2.83 2.56
Soda 1.55 3.00 2.00
Magnesia 1.45 1.07 1.00
Water, etc. 11.85 11.60 11.80
The first thing that will strike the reader on looking at these results on Welsh materials, is their uniform composition as compared with the clays from Newcastle. Yet there is as much as 10.40 per cent. of iron in sample No. 1, which cannot be a first-rate clay. Its proportion of silica to alumina is, however, excellent, and, as in sample No. 3, the amount of soda and magnesia is not excessive. The soda in sample No. 2 (which acts somewhat like lime in the kiln42) taken together with the magnesia and iron in the same material, is too much for a first-class clay, and would have to be suitably modified before good results could be obtained. On the whole, it is possible that sample No. 3 would yield the best results from the chemical standpoint.
We should not forget that remarkable43 substance of which the well-known Dinas bricks are made. The proportion of silica present ranges from about 96 to 99 per cent., the remainder consisting principally of alumina, though traces of iron, lime, and magnesia frequently occur. There is not, of course, sufficient natural flux82 for this “clay,” so a small proportion (2.5 to 3 per cent.) of lime is added, which produces the desired effect. In other words, if we can obtain a pure siliceous sand, with hardly any lime, iron or magnesia in it, we have the material of which the better kinds of fire-bricks are made. Such sandy earths are not uncommon44 in the South of England, but strange to relate, they are not used for the purpose indicated.
The earths from which the superior Stourbridge bricks are made, are approximately of the following chemical composition:—Silica, 64.10; alumina, 23.15; iron oxide, 1.85; magnesia, .95; water and loss, 10.00 per cent. It will be observed that the proportion of iron and magnesia here is very small, whilst lime is altogether absent. It is a most excellent earth for the purposes for which it is used, and the chemical results may be taken as a standard for that class of material. Another Stourbridge earth yields as much as 4.14 per cent. of iron, however, whilst its proportion of silica is lower, 51.80, and alumina higher, 30.40, which serves to remind us of the variability of even good earths used in the manufacture of fire-clay goods.
Let us now turn to the consideration of pottery45 clays, of which the following results may be taken as typical:—
Chemical Composition of Pottery Clays.
1 2 3
Silica 46.38 49.44 58.07
Alumina 38.04 34.26 27.38
Iron oxide 1.04 7.74 3.30
Lime 1.20 1.48 .50
Magnesia trace 1.94 trace
Water 13.57 5.14 10.30
83 Some of the chief qualifications, from a chemical point of view, of earths suitable for making pottery, is the proportion and potentiality of the colouring matters present. Where the pottery is to be glazed46, that is not so important; but with ordinary unglazed ware, colour and uniformity are two highly essential desiderata. We know that the temperature employed will modify the tint47, but under similar conditions the clays alluded to in the above table will give, approximately, the following results. Sample No. 1 is typical of an excellent blue pottery clay, which burns white. It contains more alumina than is commonly met with in such materials, in which respect it differs markedly also from the fire-clays just described. The proportion of oxide of iron is very small, not sufficient to perceptibly colour the finished product, though, no doubt, on careful examination it would be seen not to be perfectly white. The latitude48 of the term “white” is pretty considerable with clayworkers, as the reader is probably aware.
The pottery clay (also used for bricks) referred to in the middle column, is brown in colour; it is an ordinary kind, used primarily for black and common red ware. The proportion of iron is high, and considerable quantities of both lime and magnesia exist. As might naturally be expected of such material, it will not bear exposure to great heat, though that might be regarded as a qualification in some brick and pottery yards.
The proportion of silica is high in sample No. 3, which appertains to a common yellow clay, with, possibly, some siliceous sand in it. The amount of alumina is correspondingly low, but the iron oxide is not excessive—for a common pottery clay. It is used for the manufacture of coarse ware, and burns yellow.
The chemical composition of earths used for terra-cotta84 and bricks of that substance is so variable, that without going into each case specifically it would be impossible to convey an adequate idea. It may be stated generally that it is not one whit31 less important to consider the composition of the raw earths for ordinary brickmaking, than in respect of that for high-class bricks and pottery.
An excellent earth, from the neighbourhood of Ruabon, is of the following composition:—
Chemical Composition of Ruabon Clay.
Silica 63.00
Alumina 20.10
Sesquioxide of iron 4.84
Protoxide of iron 1.51
Potash 2.37
Soda 3.10
Combined water 3.54
Moisture 1.54
The proportion of silica in this is higher than in many clays used for brick- or terra-cotta making, but the alkalis, potash and soda, are in strong force, so that any refractoriness49 on the part of the silica is soon subdued50 in the kiln. The iron, also, is in abundance. The principal colouring ingredient is the sesquioxide, and we can quite understand the manufacturer when he informs us that, in spite of the rich tint of the goods produced, nothing is artificially mixed with this clay to produce such a result. We may call attention to the method of expressing the chemical analysis in this case, which might be copied to advantage. In the first place, the combined and the uncombined iron are separately shown, or rather the degree of combination is indicated; and secondly51, the proportion of water chemically combined is differentiated52 from that which has simply85 soaked into the clay, though expelled, following a well-known practice of chemists, prior to commencing the analysis proper. It is of very little use giving the amount of water, unless the proportions are divided in this manner. In the result given above we learn that there is very little chance of the clay shrinking, as it only contains moisture to the extent of 1.54 per cent.; but if that had been added to the water combined, we should have had a result of 5.08 per cent., which is not nearly so clear in its meaning. We may add that the Ruabon earth referred to is utilised also in the manufacture of tesselated and encaustic tiles.
In regard to the composition of earths employed in the manufacture of the commoner kinds of bricks, we may give the following examples:—
Chemical Composition of Common Brick-earths.
Silica. Alumina
and
Iron. Lime. Magnesia. Manganese. Water
and
Loss.
Reddish-brown brick clay 52.6 30.8 3.4 2.8 1.4 9.0
Red-brick clay 50.4 24.0 2.7 1.3 — 21.6
Common brick-earth 33.0 11.2 39.8 6.0 — 10.0
Sandy-clay (loam) 60.2 24.0 2.4 1.6 — 11.8
Reviewing these results, it will be noted53 that the brown colouring imparted to the brick in the first-mentioned example is due, to a large extent, to the presence of manganese, a rather uncommon feature in brick-earths, except where these have resulted from the denudation54 of iron-producing rocks rich in manganese. It will be noticed also that the proportion of water is not high for a common earth, and it must be a fairly easy86 material to deal with. There seem to be some possibilities in it that might, in competent hands, lead to higher things. The amount of lime and magnesia is, however, a rather serious one for a first-class clay.
In regard to the “red-brick” clay, an essential feature is the comparative absence of lime, and it would, no doubt, make “rubbers” of an ordinary kind. Unfortunately, in the results given, the iron is not separated from the alumina, but clearly the latter is very small in amount, and the results refer to a sandy material. The proportion of water is disastrous55 for the employment of this earth by unskilful hands. In drying, the greatest care would have to be exercised to prevent undue56 shrinking, and, in any case, the earth would have to be very thoroughly57 incorporated to make a really serviceable brick. It is with earths of this character that the majority of brickmakers in embryo59 come to grief; they know not how to handle them successfully, and twisting, warping60, cracking, and “bursting” follow as a natural consequence. It is a common and treacherous61 material, that could only be made to succeed by perseverance62 and wide experience.
The “common brick-earth,” as will be seen, contains an abnormal quantity of lime, and doubtless refers to a marl, though not much alumina is shown. Malm bricks could be made from it, and the product would have to be burned at a low temperature. For bricks useful to the “jerry-builder” this earth could be strongly recommended. It was, no doubt, mainly derived63 from limestone64 rocks; and, judging from the high proportion of magnesia, probably from within a watershed65 composed to some extent of magnesian limestone.
The “sandy-clay” or loam is of a very common type, and produces light-red bricks. There is much in common87 between this and the “red-brick clay” previously referred to.
The practice resorted to in various parts of the world of making bricks from slate66 débris, although not hitherto adopted to any large extent in this country, merits some description in this place. Slates67 may be regarded as a highly compressed clay, the original structure of which has been materially modified by the great pressure exerted during their manufacture in Nature’s laboratory. To all intents and purposes they are silicates68 of alumina, plus iron, lime, magnesia, and so on, and have, practically, the same range of variation as have ordinary clays. But during their manufacture, and subsequently, certain adventitious70 mineral matter has been frequently introduced, as may be gathered from the following results:—
Chemical Composition of Slates.
1 2 3 4
Silica 60.50 60.15 48.00 50.88
Alumina 19.70 24.20 26.00 14.12
Iron (protoxide) 7.83 5.83 — 9.96
? (sesquioxide) — 1.82 — —
? — — 14.00 —
Lime 1.12 — 4.00 8.72
Magnesia 2.20 — 8.00 8.67
Potash 3.18 — — .88
Soda 2.20 — — —
Alkalis (not determined) — 4.28 — —
Carbon dioxide — — — 6.47
Water, &c. 3.30 3.72 — —
Analysis No. 1 refers to a blue Welsh roofing slate of Cambrian age. It is quite certain that the large proportion of alkalis present would render this material unsuitable for brickmaking, except for the commonest88 kinds of bricks. The iron, again, is very large in quantity, whilst the amount of alumina is low. We could not recommend this slate for good bricks under any consideration.
Analysis No. 2 is of a dark-blue slate from Llangynog, in North Wales. The amount of iron present is high, but from the low content of alkalis this material, under proper treatment, should make fairly good bricks. The ferruginous constituent25 is too powerful, however, for fire-bricks to be made of this slate.
Analysis No. 3, of a purple slate from Nantlle, shows a remarkable diminution71 in silica and a corresponding increase in iron. Lime and magnesia being present to such an enormous extent, taken in conjunction with the iron, would render this slate absolutely useless for brickmaking. There is not a redeeming72 feature about it.
Analysis No. 4, which refers to a green Westmorland slate, has a low percentage of alumina and very large quantities of iron, lime, and magnesia. Only bricks of an exceedingly inferior quality could result from such material.
Summing up the general characteristics of these slates from the chemical aspect, one would say that none of them are very suitable for high-class bricks. No. 2 is the best. Several minor73 differences will be observed between the results quoted and those referring to ordinary brick-earths—in particular, the distribution of the alkalis. A general impression is abroad that any purple slate will do for brickmaking, and manufacturers do not yet seem to have realised that the chemical nature of slates is as variable as of brick-earths. That may account for the difficulties experienced in many cases in turning out a satisfactory material. The microscope is of much use in this connexion, however, and89 the practical effects of chemical analyses are not always as bad as they seem at first sight.
The remainder of this chapter will be devoted74 to the consideration of rarer kinds of brick-earth and other raw earths used principally in the manufacture of bricks for special purposes, or as pointing to certain anomalies. As an example of what some manufacturers can do, we may quote the chemical composition of a peculiar brick-earth employed in Zurich, in Switzerland:—
Chemical Composition of Brick-earth, Zurich.
Yellow
Clay. Blue
Clay.
Carbonate of Lime 23.68 27.80
? ? Magnesia — 5.7
Other carbon dioxide 2.85 1.55
Silica 42.39 38.25
Alumina 18.16 12.44
Iron oxide 3.66 .73
Magnesia — .15
Potash 2.14 1.54
Soda 1.27 3.05
Moisture (at 100° C.) 1.27 1.37
Water, &c., chemically combined 3.85 4.72
Here we have two clays with the carbonates of lime and magnesia present, in one case of over 35 per cent., and in the other of over 26 per cent. Professor Lunge, of Zurich, states that the bricks made from them, if burned at the ordinary heat, say a moderate red heat, are red, and do not keep in the air, but crumble75 away very soon, as the quicklime slackens on combining with the moisture. When burned at a bright red heat, about 200° C. above the former, however, they become nearly white. The lime is then present as a ferri-alumina-calcic90 silicate, which causes the red colour of the iron oxide to disappear, and, at the same time, entirely76 prevents any action of the moisture, quicklime being no longer present. We have no hesitation77 whatever in saying that most British makers58 would look down upon raw earths such as these from Zurich, and yet many millions of really good bricks have been made from them during the past twenty years, and they are especially noted for their durability78. The crux79 of the case is the temperature at which the earths are burned, as the reader has perceived.
Under the heading of “magnesia,” we have said a few words regarding basic bricks. In this country they have been made primarily from magnesian limestone, the chemical composition of which is shown in the following results of analyses:—
Chemical Composition of Magnesian Limestones80.
1 2 3 4
Silica 3.6 2.53 .8 —
Carbonate of lime 51.1 54.19 57.5 55.7
? ? magnesia 40.2 41.37 39.4 41.6
Iron, alumina 1.8 .30 .7 .4
Water, &c. 3.3 1.61 1.6 2.3
Analysis No. 1 refers to the well-known magnesian limestone of Bolsover.
Analysis No. 2 to that from Huddlestone.
Analysis No. 3 to that from Roach Abbey.
Analysis No. 4 to that from Park Nook.
These results were obtained by Professors Daniell and Wheatstone in connexion with an enquiry many years ago as to the kind of stone suitable for the erection of the Houses of Parliament.
91 Regarding them generally, it may be said that they are remarkable as not containing much acid, practically the whole substance of the rocks (except No. 1) being made of the carbonates of lime and magnesia. In manufacturing bricks of such materials as these, it will be seen that the ordinary methods of brickmaking would not suffice. On heating magnesian limestone, the carbonic acid is driven off, leaving the base behind; it is estimated that the loss of the acid, plus moisture dried out, leads to its reduction in weight of from 40 to 45 per cent., and the shrinkage is from 25 to 35 per cent. If water were mixed with this material, after calcination, strong chemical reactions would result, and of such a nature as to render a coherent mass of the kind required for making bricks impossible. Seeing that water cannot be employed, crude petroleum81 oil, coal oil, resin82 oil, &c., have been employed, all of them with more or less satisfactory results. The petroleum, &c., is mixed with the lime, and when the whole is burned the oil passes off, leaving bricks of solid lime. In manufacture it is highly essential to see that the lime is well burned, and it must be fresh, and not have been exposed to a damp atmosphere. An improvement has been effected by mixing from 5 to 7? per cent. of burned clay, which makes the lime harder after burning. An admixture of from 3 to 5 per cent. of iron oxide also consolidates83 the lime, though it increases shrinkage. The bricks are commonly made, in the first instance, under hydraulic84 pressure.
The diatomaceous earth known as Kieselguhr, which is used in the manufacture of fire-bricks for chemical works and the like, and which, for the most part, is of German origin, has the following chemical composition:—
92
Chemical Composition of Kieselguhr.
Silica 83.8
Lime .8
Magnesia .7
Alumina 1.0
Oxide of Iron 2.1
Organic matter 4.5
Water, &c. 7.1
The reader will perceive that this earth is composed very largely of silica, though there is enough iron, &c., to flux it, at any rate, without material addition. The product is extremely light, and when properly made, Kieselguhr bricks are the lightest known. They are usually of a light yellow tint, with iron spots. The silica is not in a crystalline form, the bulk of the material being composed of the hard parts of microscopic85 plants known as diatoms; it is more like flint.
An earth of a similar character is found in the Isle86 of Skye, as previously mentioned, though that burns into a redder colour.
An infusorial earth from Tuscany is composed of silica 55, magnesia 15, water 14, alumina 12, lime 3, and iron 1 per cent. That also is made into very light bricks. The general principle underlying87 the method of utilising those earths of organic origin is similar to that of the Dinas bricks, though they do not always require artificial fluxing88.
At Saarbrücken, in the Rhenish Province of Germany, a material known as “iron brick” is manufactured. It is made by mixing equal proportions of finely-ground red clay-slate with fine clay, and adding 5 per cent. of iron ore. This mixture is then treated with a 25 per cent. solution of sulphate of iron, together with a certain quantity of finely divided iron ore. It is then moulded93 and baked in a special manner. We do not intend to describe the chemical composition of the various volcanic89 ashes, trass, and other volcanic ejectamenta used for brickmaking on the Continent in several localities. The materials of which glass-sand bricks, slag-bricks, &c., are made have no special interest in connexion with our present subject, their composition naturally varying according to the particular kinds of “refuse” employed.
点击
收听单词发音
收听单词发音 |
1
molecule
|
|
| n.分子，克分子 | |
参考例句： |
|
|
|
|
2
molecules
|
|
| 分子( molecule的名词复数 ) | |
参考例句： |
|
|
|
|
3
subdivide
|
|
| vt.细分（细区分，再划分，重分，叠分，分小类） | |
参考例句： |
|
|
|
|
4
analytical
|
|
| adj.分析的；用分析法的 | |
参考例句： |
|
|
|
|
5
subdivided
|
|
| 再分，细分( subdivide的过去式和过去分词 ) | |
参考例句： |
|
|
|
|
6
aluminium
|
|
| n.铝 (=aluminum) | |
参考例句： |
|
|
|
|
7
silicon
|
|
| n.硅(旧名矽) | |
参考例句： |
|
|
|
|
8
calcium
|
|
| n.钙(化学符号Ca) | |
参考例句： |
|
|
|
|
9
peculiar
|
|
| adj.古怪的，异常的；特殊的，特有的 | |
参考例句： |
|
|
|
|
10
alluded
|
|
| 提及，暗指( allude的过去式和过去分词 ) | |
参考例句： |
|
|
|
|
11
affinity
|
|
| n.亲和力，密切关系 | |
参考例句： |
|
|
|
|
12
cohesion
|
|
| n.团结，凝结力 | |
参考例句： |
|
|
|
|
13
binds
|
|
| v.约束( bind的第三人称单数 )；装订；捆绑；（用长布条）缠绕 | |
参考例句： |
|
|
|
|
14
simultaneously
|
|
| adv.同时发生地，同时进行地 | |
参考例句： |
|
|
|
|
15
phenomena
|
|
| n.现象 | |
参考例句： |
|
|
|
|
16
combustion
|
|
| n.燃烧；氧化；骚动 | |
参考例句： |
|
|
|
|
17
decomposition
|
|
| n. 分解, 腐烂, 崩溃 | |
参考例句： |
|
|
|
|
18
oxide
|
|
| n.氧化物 | |
参考例句： |
|
|
|
|
19
soda
|
|
| n.苏打水；汽水 | |
参考例句： |
|
|
|
|
20
sodium
|
|
| n.（化）钠 | |
参考例句： |
|
|
|
|
21
magnesium
|
|
| n.镁 | |
参考例句： |
|
|
|
|
22
accomplished
|
|
| adj.有才艺的；有造诣的；达到了的 | |
参考例句： |
|
|
|
|
23
previously
|
|
| adv.以前，先前（地） | |
参考例句： |
|
|
|
|
24
qualitative
|
|
| adj.性质上的，质的，定性的 | |
参考例句： |
|
|
|
|
25
constituent
|
|
| n.选民；成分，组分；adj.组成的，构成的 | |
参考例句： |
|
|
|
|
26
constituents
|
|
| n.选民( constituent的名词复数 )；成分；构成部分；要素 | |
参考例句： |
|
|
|
|
27
quantitative
|
|
| adj.数量的，定量的 | |
参考例句： |
|
|
|
|
28
essentially
|
|
| adv.本质上，实质上，基本上 | |
参考例句： |
|
|
|
|
29
remarkably
|
|
| ad.不同寻常地，相当地 | |
参考例句： |
|
|
|
|
30
perfectly
|
|
| adv.完美地，无可非议地，彻底地 | |
参考例句： |
|
|
|
|
31
whit
|
|
| n.一点，丝毫 | |
参考例句： |
|
|
|
|
32
porcelain
|
|
| n.瓷；adj.瓷的，瓷制的 | |
参考例句： |
|
|
|
|
33
advantageous
|
|
| adj.有利的；有帮助的 | |
参考例句： |
|
|
|
|
34
flux
|
|
| n.流动；不断的改变 | |
参考例句： |
|
|
|
|
35
judicious
|
|
| adj.明智的，明断的，能作出明智决定的 | |
参考例句： |
|
|
|
|
36
remains
|
|
| n.剩余物，残留物；遗体，遗迹 | |
参考例句： |
|
|
|
|
37
ware
|
|
| n.(常用复数)商品，货物 | |
参考例句： |
|
|
|
|
38
loam
|
|
| n.沃土 | |
参考例句： |
|
|
|
|
39
permissible
|
|
| adj.可允许的，许可的 | |
参考例句： |
|
|
|
|
40
refractory
|
|
| adj.倔强的，难驾驭的 | |
参考例句： |
|
|
|
|
41
determined
|
|
| adj.坚定的；有决心的 | |
参考例句： |
|
|
|
|
42
kiln
|
|
| n.（砖、石灰等）窑，炉；v.烧窑 | |
参考例句： |
|
|
|
|
43
remarkable
|
|
| adj.显著的，异常的，非凡的，值得注意的 | |
参考例句： |
|
|
|
|
44
uncommon
|
|
| adj.罕见的，非凡的，不平常的 | |
参考例句： |
|
|
|
|
45
pottery
|
|
| n.陶器，陶器场 | |
参考例句： |
|
|
|
|
46
glazed
|
|
| adj.光滑的，像玻璃的；上过釉的；呆滞无神的v.装玻璃( glaze的过去式)；上釉于，上光；（目光）变得呆滞无神 | |
参考例句： |
|
|
|
|
47
tint
|
|
| n.淡色，浅色；染发剂；vt.着以淡淡的颜色 | |
参考例句： |
|
|
|
|
48
latitude
|
|
| n.纬度，行动或言论的自由(范围)，(pl.)地区 | |
参考例句： |
|
|
|
|
49
refractoriness
|
|
| 耐火性；耐热度；耐熔度；耐熔性 | |
参考例句： |
|
|
|
|
50
subdued
|
|
| adj. 屈服的，柔和的，减弱的 动词subdue的过去式和过去分词 | |
参考例句： |
|
|
|
|
51
secondly
|
|
| adv.第二，其次 | |
参考例句： |
|
|
|
|
52
differentiated
|
|
| 区分，区别，辨别( differentiate的过去式和过去分词 )； 区别对待； 表明…间的差别，构成…间差别的特征 | |
参考例句： |
|
|
|
|
53
noted
|
|
| adj.著名的，知名的 | |
参考例句： |
|
|
|
|
54
denudation
|
|
| n.剥下；裸露；滥伐；剥蚀 | |
参考例句： |
|
|
|
|
55
disastrous
|
|
| adj.灾难性的，造成灾害的；极坏的，很糟的 | |
参考例句： |
|
|
|
|
56
undue
|
|
| adj.过分的；不适当的；未到期的 | |
参考例句： |
|
|
|
|
57
thoroughly
|
|
| adv.完全地，彻底地，十足地 | |
参考例句： |
|
|
|
|
58
makers
|
|
| n.制造者，制造商（maker的复数形式） | |
参考例句： |
|
|
|
|
59
embryo
|
|
| n.胚胎，萌芽的事物 | |
参考例句： |
|
|
|
|
60
warping
|
|
| n.翘面，扭曲，变形v.弄弯，变歪( warp的现在分词 )；使（行为等）不合情理，使乖戾， | |
参考例句： |
|
|
|
|
61
treacherous
|
|
| adj.不可靠的，有暗藏的危险的；adj.背叛的，背信弃义的 | |
参考例句： |
|
|
|
|
62
perseverance
|
|
| n.坚持不懈，不屈不挠 | |
参考例句： |
|
|
|
|
63
derived
|
|
| vi.起源；由来；衍生；导出v.得到( derive的过去式和过去分词 )；（从…中）得到获得；源于；（从…中）提取 | |
参考例句： |
|
|
|
|
64
limestone
|
|
| n.石灰石 | |
参考例句： |
|
|
|
|
65
watershed
|
|
| n.转折点，分水岭，分界线 | |
参考例句： |
|
|
|
|
66
slate
|
|
| n.板岩，石板，石片，石板色，候选人名单；adj.暗蓝灰色的，含板岩的；vt.用石板覆盖，痛打，提名，预订 | |
参考例句： |
|
|
|
|
67
slates
|
|
| （旧时学生用以写字的）石板( slate的名词复数 )； 板岩； 石板瓦； 石板色 | |
参考例句： |
|
|
|
|
68
silicates
|
|
| n.硅酸盐( silicate的名词复数 ) | |
参考例句： |
|
|
|
|
69
silicate
|
|
| n.硅酸盐 | |
参考例句： |
|
|
|
|
70
adventitious
|
|
| adj.偶然的 | |
参考例句： |
|
|
|
|
71
diminution
|
|
| n.减少；变小 | |
参考例句： |
|
|
|
|
72
redeeming
|
|
| 补偿的，弥补的 | |
参考例句： |
|
|
|
|
73
minor
|
|
| adj.较小(少)的，较次要的；n.辅修学科；vi.辅修 | |
参考例句： |
|
|
|
|
74
devoted
|
|
| adj.忠诚的，忠实的，热心的，献身于...的 | |
参考例句： |
|
|
|
|
75
crumble
|
|
| vi.碎裂，崩溃；vt.弄碎，摧毁 | |
参考例句： |
|
|
|
|
76
entirely
|
|
| ad.全部地，完整地；完全地，彻底地 | |
参考例句： |
|
|
|
|
77
hesitation
|
|
| n.犹豫，踌躇 | |
参考例句： |
|
|
|
|
78
durability
|
|
| n.经久性，耐用性 | |
参考例句： |
|
|
|
|
79
crux
|
|
| adj.十字形；难事，关键，最重要点 | |
参考例句： |
|
|
|
|
80
limestones
|
|
| n.石灰岩( limestone的名词复数 ) | |
参考例句： |
|
|
|
|
81
petroleum
|
|
| n.原油，石油 | |
参考例句： |
|
|
|
|
82
resin
|
|
| n.树脂，松香，树脂制品；vt.涂树脂 | |
参考例句： |
|
|
|
|
83
consolidates
|
|
| 巩固 | |
参考例句： |
|
|
|
|
84
hydraulic
|
|
| adj.水力的；水压的，液压的；水力学的 | |
参考例句： |
|
|
|
|
85
microscopic
|
|
| adj.微小的，细微的，极小的，显微的 | |
参考例句： |
|
|
|
|
86
isle
|
|
| n.小岛，岛 | |
参考例句： |
|
|
|
|
87
underlying
|
|
| adj.在下面的，含蓄的，潜在的 | |
参考例句： |
|
|
|
|
88
fluxing
|
|
| 稀释，冲淡； 造渣； 熔解； 增塑 | |
参考例句： |
|
|
|
|
89
volcanic
|
|
| adj.火山的；象火山的；由火山引起的 | |
参考例句： |
|
|
|
| 欢迎访问英文小说网 |